CP PUMPEN AG, Im Brühl, 4800 Zofingen, Switzerland
Tel. +41 62 746 85 85, Fax +41 746 85 86, info##at##cp-pumps.com

CP’s commitment: this page has been optimised for printing to help you save ink and paper.

Choose your country

Selected: United States

Your local CP sales contact

Dyna-Mag Inc.
Don Fisk
1621 Smugglers Cove Cir.
Gulf Breeze, FL 32563
P +1 859 630 7704
F +1 406 215 1414


MKP-ANSI – Magnetic Drive Chemical Process Pump

Back to Product Guide

  • Pump dimensions to ANSI ASME B73.3
  • Compact design with virtually no dead areas, allowing easy and efficient heating
  • Horizontal and vertical configurations available
  • Hydraulically balanced impeller for minimum bearing loads
  • Internal and external bearing lubrication and flush options
  • Solids handling capability up to concentrations of 30% and a particle size of 1/25" depending on the pumped fluid
  • Lower installation costs due to a single heating jacket for heating
  • Excellent heat distribution reducing temperature differences and preventing cold zones
  • Fast heat-up time assured by high heat transfer efficiency and heating energy delivered directly into the fluid chamber
  • Modular system consisting of just a few components, easy assembly

MKP-ANSI Broschure | Order »
MKP-ANSI Fact Sheet


Operation Range
Capacities 1 to 450 gpm
Heads 10 to 310 ft
Pressure rating PN 16
Temperatures -148°F to +482°F
Kinematic viscosities 0.5 to 350 mm2/s
Solids handling Up to 30% solids concentration and 1/25" particle size, depending on the pumped fluid
Casing Materials
Stainless steel 1.4581 (316Ti)
Other materials Stainless steel (e.g. 1.4306, Uranus® B6), duplex alloys (e.g. 1.4517),
nickel-base alloys (e.g. Hastelloy® C-4, C-22), nickel (e.g. 2.4170),
titanium (e.g. Grades 2 and 7) and titanium alloys (e.g. Grade 5)
ceramic coating
Working Principle Radial flow pump
Stages Single stage
Priming Method Flooded suction
Sealing System Magnetic coupling
CP's standard configuration Close-coupled
Additional options Horizontal, baseplate, bracket
Standards ANSI ASME B73.3
Other Regulations
FDA 21 CFR §177


Jacketed Casing
Materials of construction Stainless steel (e.g. 1.4306, Uranus® B6)
Duplex alloys (e.g. 1.4517)
Nickel (e.g. 2.4170) and nickel-base alloys (e.g. Hastelloy® C-4, C-22)
Titanium (Grades 2 and 7) and titanium alloys (e.g. Grade 5)
Ceramic coating
Connection flanges To EN 1092-1
Drilled to ANSI/ASME B16.5
Additional connections Casing drain (with or without flange)
External flush connection for bearing lubrication and/or flushing and cooling the magnet assembly
Manometer connection on the casing
Lantern monitoring connection
Flange connection for heating jacket*
Heating jacket drain (with or without flange)*
Other casing connections to meet customer needs
*Available for jacketed casing only
Gasket materials PTFE
Graphite/stainless steel 1.4401
Graphite/nickel-base alloy 2.4819 (Hastelloy® C-276)
Sigma 511®/NT-CHEM-beige®
Plug seal materials PTFE
Silver-plated nickel
Casing wear ring

Bearing Assembly
Materials SSiC (sintered silicon carbide)
SSiC with graphite
SSiC with diamond-like coating (ADLC)
SSiC mit FuturaSafe®
Nickel-bound tungsten carbide
Nickel-bound tungsten carbide with diamond-like coating (ADLC)

Containment Shell
Materials Stainless steel
Hastelloy® C
Heavy-duty plastic (eliminating eddy current losses)
Zirconia ceramic (eliminating eddy current losses
Coating Al2O3 ceramic
Cont. shell vortex breaker
Containment shell insulation
Double-walled cont. shell With containment shell leakage monitoring

Pump Protection
Thermocouple On containment shell
Double-called cont. shell With containment shell leakage monitoring
Temperature monitoring Containment shell temperature monitoring, Pt100 temperature probe
Motor load sensor




Stainless steel

Drip pan

Bearing Frame
Lubrication Oil lubrication
Grease lubrication
Oil lubrication options Hermetic seal (MagTecta OM™)
Constant level oiler
Oil cooling with or without thermostat
Coupling guard Steel


  • Chemical processing:
    basic and fine chemicals
    (agrochemicals, speciality chemicals)
  • Pharmaceuticals
  • Biotechnology processing
  • Food and beverages
  • Pulp and paper


A wide variety, including:

  • Aseptic processes
  • Chlor-alkali electrolysis
  • MDI processes
  • Refrigeration and heating cycles
  • Tank unloading
  • TDI processes


Acids, bases, solvents, heated, crystallising and refrigerated liquids, as well as fluids containing solids. For example:

  • Hydrogen peroxide
  • Molten sulphur
  • Nitric acid
  • Oleum
  • Phosgene
  • Phosphoric acid
  • Potassium hydroxide solution
  • Sodium hydroxide solution
  • Sulphuric acid
  • Toluene

| More