CP PUMPEN AG, Im Brühl, 4800 Zofingen, Switzerland
Tel. +41 62 746 85 85, Fax +41 746 85 86, info##at##cp-pumps.com


CP’s commitment: this page has been optimised for printing to help you save ink and paper.


Choose your country

Selected: United States

Your local CP sales contact

Dyna-Mag Inc.
Don Fisk
1025 Terrace Lane
Corvallis, MT 59828
USA
P +1 859 630 7704 
F +1 406 215 1414 
E-mail

Mounting Arrangements

Horizontal

  • Pump and motor forming a compact unit.
  • Simple design with few components: no bearing frame or driver coupling required.
  • No maintenance required for bearing lubrication and driver coupling.
  • Easy assembly and installation, no alignment required.
  • Saves space.
  • Ideal for stilt-mounting, without a plinth or foundation.
  • Ideal for sealless magnetic drive pumps.
  • Motor can be removed without opening the pump.
  • CP models: MKP, MKP-Bio, MKP-S, MKPL, MKPL-S, MSKP, MSKPP, MSKS



Horizontal arrangement

Vertical

  • Saves space.
  • Pump fully drainable through the suction port.
  • No sludge build-up in the pump casing.
  • No imbalance when starting the pump.
  • Ideal for slurries and molten media.
  • Close-coupled or frame-mounted configuration available.
  • CP models: MKP, MKP-Bio



Vertical arrangement

Bracket

  • Extremely versatile installation options (horizontal, vertical, on a wall or overhead).
  • Ideal when space is limited.
  • Excellent pump insulation possibilities.
  • No heat transfer through pump casing feet (in contrast to baseplate mounting).
  • Ideal for pumping heat transfer fluids and coolants.
  • CP models: MKP



Bracket arrangement

Centreline support

  • Construction allowing sealless magnetic drive pumps to be used at high operating temperatures up to 350°C.
  • Ideal for pumping heat transfer fluids.
  • High-temperature pumps equipped with a built-in fan to cool the magnetic coupling and prevent overheating of the bearing frame.
  • High-temperature pumps constructed with centreline support to compensate for dimensional expansion of the pump casing caused by temperature changes.
  • No heat transfer through pump casing feet.
  • CP models: MKP



Centreline support arrangement

In-line

  • Suction and discharge flanges located on the same centerline (in-line).
  • Easy assembly and installation.
  • Saves space.
  • Close-coupled drive, with pump and motor forming a compact unit.
  • Simple design with few components: no bearing frame or driver coupling required.
  • No maintenance required for bearing lubrication and driver coupling.
  • Motor can be removed without opening the pump.
  • CP models: MKP, SZMK, MKPP



Inline arrangement

Sump pump

  • Ideal for storage tanks with no bottom drain.
  • Pump available with a sealless magnetic coupling or mechanical shaft seal.
  • Column length up to 4 m.
  • Combinable with an injector to provide a tank unloading system for emptying large tanks.
  • CP models: MKTP, KTP



Sump pump arrangement

| More